Xinxiang New Leader Machinery Manufacturing Co., Ltd
Top leader is our objective, client need is our motivation.
Add to Cart
5 Ton Motorized Tool Steerable Material Transfer Trackless Electric Handling Car On Wheels is an electric trackless electric handling car without rails, which is the special type compared with traditional rail handling car. More importantly, it has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop that it exists unfixed running distance.
The trackless electric handling car is powered by storage battery. The battery is installed in the transfer car and we also equip intelligent charger for it. The electric handling car is controlled to go forward, backward, turn left, turn right, adjust speed through PLC and speed controller. It can turn around on the cement and concrete floor.
Flat decks or fixtures customized for specific loads.
Custom deck configurations including built-in scales and lift/tilt/rotate capabilities.
Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels.
Fixed or variable speeds with forward/reverse function.
Drives with acceleration/deceleration capabilities.
Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation.
Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
The trackless electric handling car is mainly applied in assembly line, metallurgy industry, warehouse transport, ship industry, work piece transport in workshop, lathe transport, steel factory, construction, petroleum industry, energy, chemical industry, railway, etc.
| Model | BWP-2T | BWP-10T | BWP-20T | BWP-30T | BWP-50T | BWP-80T | BWP-100T | |
| Rated load (T) | 2 | 10 | 20 | 30 | 50 | 80 | 100 | |
| Table size | length(L) | 2000 | 2300 | 2400 | 3500 | 5500 | 6500 | 6600 |
| Width(W) | 1500 | 2000 | 2200 | 2200 | 2600 | 2800 | 3000 | |
| Height(H) | 450 | 500 | 600 | 700 | 800 | 950 | 1200 | |
| Wheel Base (mm) | 1080 | 1650 | 2800 | 1650 | 2000 | 1950 | 2000 | |
| Axle Base (mm) | 1380 | 1850 | 1435 | 2700 | 2850 | 3500 | 4000 | |
| Wheel Diameter(mm) | Φ250 | Φ400 | Φ350 | Φ450 | Φ600 | Φ600 | Φ600 | |
| Wheel Quantity(Nos) | 4 | 4 | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance (mm) | 50 | 50 | 50 | 50 | 50 | 75 | 75 | |
| Running speed (m/min) | 0-25 | 0-25 | 0-20 | 0-20 | 0-20 | 0-20 | 0-18 | |
| Motor Power (Kw) | 2*1.2 | 2*2.2 | 2*4.5 | 2*5.5 | 2*7.5 | 30 | 40 | |
| Battery Capacity(Ah) | 250 | 250 | 400 | 450 | 500 | 800 | 1000 | |
| Battery Voltage(V) | 24 | 48 | 48 | 48 | 72 | 72 | 72 | |
| Running Time When Full Load | 2.5 | 2.8 | 2.2 | 2 | 2.5 | 2 | 1.9 | |
| Running Distance for one Charge(Km) | 3 | 3.4 | 2.7 | 2.4 | 3 | 32.4 | 2.3 | |
| Max Wheel Load (KN) | 14.4 | 42.6 | 77.7 | 110.4 | 174 | 185 | 190 | |
| Reference Weight (t) | 2.3 | 4.2 | 5.9 | 6.8 | 8 | 14.6 | 26.8 | |
Xinxiang New Leader Machinery Manufacturing Co., Ltd is devoted to manufacture and sell lifting and handling equipment. We can produce 1-500 ton range of various tonnage of KPD rail low voltage series, KPJ cable reel series, KPC safety sliding line series, KPX battery powered series, BWP rubber wheel transfer cart series, KPT towed cable series, KP non-power type seven series which including turning electric flat car, trackless electric flat car, ladle car, ferry electric flat car, hydraulic lifting electric transfer car, electric winch, rail wheel and so on more than 90 products.