Xinxiang New Leader Machinery Manufacturing Co., Ltd
Top leader is our objective, client need is our motivation.
Add to Cart
The Industrial Material Handling Trackless Transfer Trailer Non Motor Transfer Cart With Draw Bar is important equipment for modern logistic transportation, which is very effective and simple way to improve the production efficiency. The transfer trailer non motor transfer cart has several advantages, such as high bearing capacity, high efficiency, and lower cost. Usually one or more non motor transfer cart could be towed by one tractor. The material handling trackless transfer trailer is widely used in a lot of place, such as airports, sea ports, railway stations, factories and large warehouses, which will greatly improve the transportation efficiency and reduce the cost of forklift and labor.
1.The trackless transfer trailer will apply pressed-on solid rubber tire, which makes the trailer with low height but heavy load capacity.
2.The wheels quantity of the material handling trackless transfer trailer non motor transfer cart is from 8-16, and service life of wheels will be over than 5 years, which is very safe, reliable and cost saving
3.We will use heavy steel to build the structure of the non motor transfer cart, which will have a service life at least 20 years
4.Several non motor transfer cart could be towed together
5.Running distance of non motor transfer cart is unlimited;
6.The height of towing hook is adjustable to adapt different tractor, forklift. There are two springs on the towing device, which will protect the trailer and cargo when it is started or suddenly stopped.
7.The turning device is large rotation support as the fifth wheel, which is usually used in excavating machinery and truck crane.
8.Trackless transfer trailer applies balance beam for the wheels to make the trailer available on the uneven ground
9.The frame of non motor transfer cart is made of steel beam, so the load ability of the trackless transfer trailer is strong and it is not easy to bend over and avoid the deformation, which extends the service time;
10.The non motor transfer cart applies balance beam for the wheels to make the trailer available on the uneven ground
11.The non motor transfer cart will be equipped with connector or pin to cooperate with the tractor or forklift.
| Rated Load(Ton) | 2 | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | |
| Table Size(mm) | Length | 2000 | 2200 | 2300 | 2400 | 2400 | 3500 | 3500 | 5500 | 6600 |
| Width | 1500 | 2000 | 2000 | 2100 | 2200 | 2200 | 2200 | 2500 | 2600 | |
| Height | 450 | 500 | 550 | 600 | 600 | 700 | 700 | 800 | 1200 | |
| Wheel Base(mm) | 1080 | 1650 | 1650 | 1600 | 1650 | 1650 | 1650 | 2000 | 2000 | |
| Axle Base(mm) | 1380 | 1680 | 1700 | 1830 | 1850 | 2700 | 2700 | 3600 | 2850 | |
| Wheel Quantity(Pcs) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Wheel Diameter(mm) | Φ250 | Φ300 | Φ350 | Φ400 | Φ400 | Φ450 | Φ450 | Φ500 | Φ600 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |
| Max Wheel Load(KN) | 14.4 | 25.8 | 42.6 | 64.5 | 77.7 | 94.5 | 110.4 | 142.8 | 174 | |
| Reference Wight(Ton) | 2.3 | 3.6 | 4.2 | 5.5 | 5.9 | 6.5 | 6.8 | 7.6 | 8 | |
| The size can be customized as per demands. | ||||||||||
Flat decks or fixtures customized for specific loads.
Custom deck configurations including built-in scales and lift/tilt/rotate capabilities.
Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels.
Fixed or variable speeds with forward/reverse function.
Drives with acceleration/deceleration capabilities.
Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation.
Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Xinxiang New Leader Machinery Manufacturing Co., Ltd is devoted to manufacture and sell lifting and handling equipment. Our products cover rail transfer car, steerable transfer car, trackless flat cart, towed transfer cart, bay to bay rail transfer cart, rail wheel, industrial winch, etc.
Our products have a wide application field including metallurgy industry, machinery manufacturing industry, steel mill, mine industry, power industry, mold industry, automobile assembly industry, shipyard industry etc. Our products have been exported to more than 50 Countries and regions, such as USA, Canada, Mexico, Germany, Netherlands, Vietnam, Thailand, Philippines, Saudi Arabia, South Africa etc.